STANDARD TRAILER
Chassis & Superstructure Details
Chassis
Flat chassis frame made of high-quality steel. 2 main beams of composite I-profile HOH 1200 mm. Traverses at an average of 400 mm, extra traverse at 200 mm at the back. Edge profile in gutter shape with the necessary lashing holes in the side (average every 200 mm). Bolted hook-on profile against edge profile for tarpaulin. Wide clutch plate. Back calf with rear edge profile in pleated box shape. Removable 2 "kingpin (1 position 1681 mm / head radius 2040 mm). Rear corner bracing as protection for worm gearbox. Bolted bumper bracing.
Superstructure
Curtainsider superstructure following load safety standard EN 12642 - XL - TüV 27 T. Front panel with angled corners, formed by steel corner posts, 2 full height steel center posts and 18 mm thick plywood board and with 300 x 3 mm galvanized steel bumpers at the bottom. Quick release to relax tarpaulin at the front. Left and right roll-up support for TIR cord. Left and right 3 Van Hool clamp-hook center posts. At the bottom long plank and above on 4 levels (inner plank continuous). Without side boards. Sunroof Versus cube trike, sealed with white carapace roof tarpaulin. Curtainsider premium with buckles every 550 mm. Curtainsider hooks on bolted hook-on profile. High plymetal rear doors with aluminum frame, 4 surface mounted hinges and Thiriet recessed locks per door. Door retainers on the left and right.
Dimensions
Superstructure
Construction height | 2.750 mm |
Insertion height at the side | 2.630 mm |
Insertion height at the back | 2.670 mm |
Interior height | 2.710 mm |
Total height | 4.000 mm |
Chassis
Total length | 13.900 mm |
Wheelbase | 7.800 mm |
Front overhang | 1.681 mm |
Edge profile width | 2.480 mm |
Neck beam height | 120 mm |
Coupling height | 1.130 mm |
Chassis height | 1.250 mm |
Weights
Coupling | 12 MT |
Axles | 27 MT |
Total | 39 MT |
Coupling
Interchangeable 2" kingpin, 1 position.
Broad coupling plate 8 mm thickness.
Electricity equipment
-
According to legal EC regulations
-
24 V
-
ADR cabeling
-
2 x 7-pin socket (ISO 1185 - ISO 3731)
-
1 x 15-pin socket (ISO 12098)
-
Front position lamps 2 x front and 2 x rear LED
-
Side lights Aspock LED
-
License plate light Aspock LED
-
Energy bracket 560 mm (mounted higher)
Axle set
-
3 x 9T SAF Intradisc Airvent
-
Disc brakes (dia 430 mm)
-
Air suspension
-
Lifting and lowering valve Wabco TASC
-
Axle distance 1310 mm / 1310 mm
-
EBS Wabco 2S / 2M with power supply via plug ISO 7638 + emergency power supply
-
Stainless steel
-
Spring brake cylinders on 2 axles
-
Steel air tanks
-
Air couplings ISO 1728
ADR
-
ADR board foldable on back door
-
Grounding strip
-
ADR test
-
No fire extinguisher / cabinet
Configuration
Tires:
-
6 tires 385 / 65R22.5 Bridgestone R168
-
Spare wheel holder not included
Rims: 6 steel rims 11.75 x 22.5 ET120
Bumper:
-
Round galvanized rear bumper with Aspöck europoint III rear lights (position / stop in LED)
-
Large mud flap Van Hool
Floor: Multiplex floor, 30 mm thick
Bicycle catchers: included in aluminium
Wheel chocks: 2 pieces included
Tool case:
-
Plastic case (825x475x470) left for axle set.
-
Plastic case (825x475x470) right for axle set.
Ladder: extendable ladder at the back
Document sleeve: red document sleeve incl.
Lashing eyes: 2 x 13 forged lashing eyes
Insert shelves: 24 wooden side boards (in total)